|
DoorWatcher™
Easyfit Strip Sensor
 |
| Wander
Prevention for loved ones with dementia |
| ¡E |
The professional product helps caregivers watch over those
in their care and prevent wandering out of doors. It immediately
alerts caregivers when patients wearing wristband tags move
within range of protected doors, providing an audible and
visual alarm so they may be diverted from existing.
|
| ¡E |
The kit consists of one black door strip (DMS-01), Tester
with door alarm control (TTEST-01) and one or more patient
wristband transmitter (TXP-01)
|
| ¡E |
The tester device showing the wristband number within range,
serves as a wristband tester, door strip tester & a reset
transmitter.
|
| ¡E |
The product can be connected to a door lock & has an adjustable
system timer allows compliance with fire regulations with
brief, temporary locking to prevent immediate egress by patient.
|
| ¡E |
The
product provides simplicity, elegance & afferdability.
It is easy to install, consisting of one or more unobtrusive
black sensor strips affixed along the top or sides(s) of the
door frame. It is highly cost effective for single or multiple
door location.
Features :
|
| ¡E |
Easy
temporary installation & automatic range setting |
| ¡E |
Audible
& visual alert from strip sensor & display |
| ¡E |
Low
battery detect for all waistbands |
| ¡E |
Unique
magnetic switch on waistbands for longer battery life during
storage |
| ¡E |
At
central monitor is used, the door strips are automatically fault-checked
& ensure operation
|
| |
|
|
|
| Wireless Bed Monitoring System |
| Wander
Prevention for loved ones with dementia |
| ¡E |
This system comprises a wireless bedside transmitter(BTXV-01), wireless
receiver(BRX-01)& nursecall extension cord with push button(NEC-01).
|
| ¡E |
It is designed to detect when weight is removed from a pressure
pad if a patient rises from the bed. Alternatively, no moving
out of the bed, the patient can trigger our light sensor(s),
stepping out of bed, trigger the floor mat alarm.
|
| ¡E |
Wireless bedside transmitter provides selectable voice &
tone sounds and connections for various pressure pads. When
an alarm is triggered, it can send a signal to our wireless
products such as Central Monitor. A patient call button on
the unit, allowing an active call for help. It can connect
with an extension cord call button.
|
| ¡E |
Wireless receiver has selectable tone and "chime"
sounds. It will receive the signal sending from wireless bedside
transmitter.
|
| ¡E |
Various sizes of pressure pads/mats for selection.
|
| |
|
|
|
Wireless
Disabled BathRoom Alarm
 |
| Emergency
assistance alarm provided in toilet for disabled people |
| ¡E |
A wireless call system to gain immediate help in an emergency,
designed to meet the worldwide need and desire to better serve
disabled people.
|
| ¡E |
The
system includes:
- a waterproof call button with pull cord (WCP-02) to press
for help
- a waterproof reset button (WRE-02) to cancel the alarm after
rescue
- an emergency call alarm (ILB-01) to ensure emergency action
is taken
|
| ¡E |
Complies with regulations devised to ensure barrier free entry
and use of public facilities by the disabled.
|
| ¡E |
It has applications in hospitals, elderly homes, schools,
universities, factories, offices, restaurants, hotels, shops
etc.
|
| ¡E |
It
may be monitored centrally from an office or guard room using
our Central Monitor (CMU-02)
|
| |
|
|
|
| Maxi
Nursecall Central Monitoring System |
| ¡E |
Patient can call for assistance from fixed or mobile transmitters
anywhere in the facility. The system identifies them by device
code. It comprises a Central Monitor Unit (CMU-02) with a
socket for connection of optional external receivers allowing
large areas to be covered. It is designed to detect and display
up to 10,000 ID codes of various transmitter types alert caregivers,
wardens, nurses or security personnel.
|
| ¡E |
This
feature can be applied to people, or used to tag equipment
and other assets. System is fully supervised detecting any
equipment faults, out of wireless range or battery exhausted.
Also indicates battery low (~90% used) and interference detected.
|
| ¡E |
Various
transmitters/devices include Patient wristband transmitter
(TXP-01), Wireless bedside transmitter with call button (BTXV-01),
Waterproof call button with pull cord (WCP-02), Wired/wireless
call alarm, Big LED display panel (LEDP-01) and etc.. Please refer to the
catalogue for details.
Features :
|
| ¡E |
Identifies multiple residents at the same time |
| ¡E |
Identifies an unlimited number of residents |
| ¡E |
Low-battery detection |
| ¡E |
Wander pager function |
| ¡E |
Fully supervised out of range feature |
|
| |
| Simple
WirelessNurseCall |
| Wireless
Call Bell and Paging System for smaller homes |
| ¡E |
Provides the ability for residents to call for help by pushing
a pendant or wall-mounted button from anywhere in your facility,
sending a signal to a display or pagers carried by caregiver.
|
| ¡E |
It is easy to install, consisting of as many fixed and mobile
buttons as required, recorded into any of 30 sectors to be
displayed at the display panel. The panel has capacity for
up to 250 call buttons, since each sector can have multiple
buttons associated.
|
| ¡E |
The display panel can be wall-mounted or stood on a table
top and a choice of 3 volume-adjustable alarm sounds, plus
the number of the calling transmitter button, stated in your
chosen languages is available ¡V 11 languages currently.
|
| ¡E |
The button number is displayed and announced at the display
panel & pager.
|
| ¡E |
This product helps caregivers watch over those in their care
and makes their vital job easier. It is designed to be flexible
and affordable for small-homes and enabled them to upgrade
economically or use where installation of cables is not a
practical or cost-effective proposition.
|
| |
|
|
|
| Wireless
Pager Kit with two call buttons |
| ¡E |
This
is the simple and low cost version of our wireless call system.
The kit (QPT-01) comprises 2 remote push/call buttons which
transmits a signal to the pager receiver. No display. |
| |
|
|
|
| Rondish
Homecare Kit (HCKIT-01) |
| Low-cost
(Simple) Wireless Call & Paging System |
| ¡E |
This
simple-to-use wireless monitoring equipment is an invaluable
aid to carers of elderly or disabled persons at home,
or in small care centres. Battery operated, light weight
and completely portable, the equipment can easily be
transported in a small carrycase.
|
| ¡E |
This
kit comprises:
| 1. |
Caregiver
wireless remote pager (PAG-01) |
| 2. |
Bed
monitor with on/off switch (BME-01) |
| 3. |
Wireless
infra-red movement detector for door, or bedside
area monitoring |
| 4. |
15"
x 10" (BPS-01) wheelchair pressure pad.
Larger sizes available upon application |
| 5. |
Wireless
emergency call button. A bracket is provided,
typically for wall mounting, and a strap is
included for alternative pendant use. |
|
|
|
|
|
Bed/ChairWatcher™
Bed Monitoring System with Nursecall output |
| This
system detects when a frail and vulnerable patient leaves
the bed. It comprises a pressure-sensor pad in the bed connected
to a bed monitor unit. A range of bed monitor units are available,
selection depending upon the application.
Monitor
types:
1.
Voice bed monitor (BMV-01) has selectable voice and
tone sound options with LED alert if the patient leaves the
bed. The voice message is pre-programmed, eg. To say "Please
lie back down" or "Please sit back down" .
Three output levels can be selected, including delay setting.
2. Safety reset bed monitor (BMS-01) Automatically
rearms when the patient sits down on the pad. The manual-reset
button can be disabled by adjusting the recessed switch in
the side of the monitor unit and a carer may use the magnetic
reset caregiver key (patent applied). This prevents a difficult
patient from resetting an alarm himself by pressing the reset
button.
3. Standard bed monitor (BME-01) is a low-cost,
stand-alone monitor with limited features. A switch is provided
for the caregiver to easily switch the unit on/ff and it also
used to reset an active alarm. It can provided different tone
sounds and an LED alert to the caregiver if the patient leaves
the bed.
4.
Pull string bed monitor with magnet (BMPS-01) is
simple but effective system includes a magnet that is attached
to the front panel of the monitor via a cord. The cord has
an attachment clip. When the cord is pulled eg. By the patient
moving out of the bed or wheelchair, the magnet is detached
from the monitor unit causing an alarm to be activated.
SilverLining pressure pads & mats options:
1.
Bed pads 30" x 20" (BPL-01) ¡V 1 year warranty
2. Bed pads 30" x 10" (BPM-01) ¡V 1 year warranty
3. Wheelchair pads 15" x 10" (BPS-01) ¡V 1 year warranty
4. Light-weight floor mat 30" x 20" (FMAT-01) ¡V
1 year warranty
5. Heavy-duty non-slip floor mat 24" x 48" (FMAT-02)
¡V 1 year warranty
6. Toilet seat pressure pas (TP-01) ¡V 30 days warranty
7. Bed pads 30" x 20" (BP-01) ¡V 3 months warranty
8. Wheelchair pads 15" x10" (WP-01) ¡V 3 months warranty
Please
refer to catalogue for Monitor functions, features & accessories.
|
|
|
|
| Silverlining™
Non-slip Floor Mat with alarm |
| ¡E |
These
mats, used to monitor beds or doors, detect a person¡¦s weight
when stepped on.
|
| ¡E |
Made of heavy-duty non-slip material, this alarm mat is designed
to lie flat and to last, with continuous use.
|
| ¡E |
It plugs into our standard bed monitors, wireless transmitters,
DIY door monitor or can be used with other systems available
of the market.
|
| ¡E |
Available size of mat : 48" x 24"
|
| ¡E |
MOQ is required for different size & colour.
|
|
|
FallWatcher™
Low cost Omni-Directional Pull String
Monitor |
| ¡E |
This
simple monitor (PS-01) sounds an alarm when the pin is removed,
if the patient tries to leave his bed or seat. It has two
sounds levels and a replaceable 12V battery.
|
| ¡E |
The
alarm unit moves with the string to prevent risk of jamming
due to pulling pin at the right angles.
|
|
|
| Light-sensor
Bed Monitoring System |
| ¡E |
This
system helps to reduce the risk of patient falls by monitoring
for unwanted movement at the bedside. If a patient interrupts
the light sensor by rising from the bed, the alarm on the
bed monitor is triggered.
|
| ¡E |
It comprises one or two light sensors operating with our ¡§light
sensor bed monitor or wireless bedside transmitter.
|
| ¡E |
The sensor does not detect motion, but senses blocking by
any object fixed, or moving within its range. The maximum
valid distance for detection is approx. 1.7M (6ft.)
|
|
|
| Traditional
Nursecall System |
| Nurse
& Warden Call Systems |
| We
produces a full range of nurse and warden call systems, from
simple wired low-cost buzzer alert systems to systems with
multiple call types such as intercom, waterproof buttons,
pullcord alarms, wireless transmitters and so on.
Our systems
allow full flexibility to expand where required, including
adding door monitors, bed monitors and security - related
devices.
Systems
include:
1)
. Simple wired alert system
2) . Simple wireless system
3) . Large wired system with
wireless receiver options
4) . Advanced system with location
features
Noted:
Please refer to our catalogue for more details of the above
systems
|
| ¡E |
The system can locate and identify the person in trouble anywhere
in the buildings.
|
| ¡E |
Dual mercury trips are triggered if a person is horizontal
for 5 seconds. When a nurse is attacked and falls, the tag
will automatically send an ask-for-help wireless message.
|
| ¡E |
The tag is easy to carry, just a little bigger than the size
of a dollar coin.
|
| ¡E |
To use as a panic button. The nurse can press the center of
the unit, creating an instant alarm or alternatively a pullstring-type
alarm is available.
|
| ¡E |
Uses low-power radio transmissions with 100ft range.
|
| ¡E |
It can detect the movement of equipment if tagged and alert
if moved into ¡§not allowed¡¨ zones.
|
| ¡E |
Locates position and I.D. of caller.
|
| |
|
|
|
| FallWatcher™
PIR (Passive Infra Red) Alarm System |
| ¡E |
This
passive infra red alarm provides simple, safe and dependable
motion detection to help supervise patients, preventing falls
from the bed. When the sensor detects motion, it triggers
the alarm.
|
| ¡E |
The PIR curtain beam is a narrow vertical fan-shape so only
a very specific bedside area is monitored.
|
| ¡E |
Battery-powered and with an easy-to-fit bracket, it can be
installed in minutes.
|
| ¡E |
It includes an alarm on/off switch & can be attached to
the bedhead or bedrail, using clip mount. Adjustable flexible
clip extension is 6" long.
|
|
|
| Easy-Release
Seatbelt Alarm |
| ¡E |
This
is a fall-prevention device that holds the elderly/patient
safely in the chair. Once the belt (SEAT-01) is unbuckled,
an alarm sounds to alert staff.
|
| ¡E |
A complete system comprises an adjustable belt, easy-release
buckle and alarm monitor.
|
| ¡E |
Available with a choice of alarm monitors with voice message
alert, or auto-reset function, or on/off switch version.
|
| ¡E |
For remote management of one or several patients, our wireless
alarm monitor can be used to sends an alarm signal to our
Central Monitor at nurses station to alert staff.
|
| ¡E |
Other features include low-battery warning light, nursecall
jack to connect the alarm to the nursecall system and more.
|
|
|
| HelpSignal
Emergency Dialer |
| Remote
supervision of loved ones, without monthly charges |
| ¡E |
This plug and play HelpSignal uses any home telephone socket
and provides the ability to remotely monitor someone, enabling
them to call you quickly when needed.
|
| ¡E |
HelpSignal consists of an autodialer which is triggered using
a wireless pendant worn by the user, at the simple press of
button or by pressing any one of the 3 orange ¡§Emergency
Call¡¨ buttons below the dial pad.
|
| ¡E |
It automatically dials up to 4 numbers of relatives, friends,
neighbors or professional caregivers who are remotely supervising
the person under care.
|
| ¡E |
Once connected, a pre-recorded message giving call information
is played, after which it switches to speakerphone function
allowing the carer to talk to the user and assess the nature
of the caller¡¦s condition.
|
| |
|
|
| |
The
unit can be programmed with up to 12 telephone numbers, one
for each button. Pictures are placed under the easy-lift,
large buttons so the elderly person can easily call without
dialer. No power supply or batteries required.
|
|
|
|
Bed
Rail Pad Plus Gap Stuffer
The pads
help protect against injury. The wedge design fills in the
gap between mattress and side rail. These resilient foam wedges
attach to bed rails with Velcro straps. Easy-to-install, easy-to-remove
and easy-to-clean with soap and water. Various sizes are available.
Wheelchair
Straight Cushion
Helps
patients by creating a flat surface preventing forward slipping
and helps give a more comfortable posture. The cushion has
a zip along the edge to allow inserting a wheelchair alarm
pad.
Bed
Safety Wedge
Helps
prevent injury by falling out of bed and helping patients
to lie on their side. Made of soft foam and easy-to-clean
removable PVC cover. Various sizes available.
Folding Fall Mattress with alarm
|
| ¡E |
Fall
mattresses are particularly useful to protect the patients
from fall-related injuries in facilities that prohibit the
use of side rails on beds.
|
| ¡E |
These firm, energy-absorbing mattresses are made in choice
of two different thickness of 2" or 4" . Filled
with two types of foam ¡V one for softness to spread the weight,
and the other to absorb impact force for more concentrated
loads such as knees and elbows. They are purposely designed
to help reduce the chance of serious injury.
|
| ¡E |
Optionally a monitoring pad can be fitted and when used with
our bed monitoring series a signal alerts the staff that the
patient has fallen. Folding design allows easy carry or storage
and the following sizes are available.
36" x 68" x 2"
36" x 48" x 4"
|
|
|
SafeTime
& SilverLining™
Pressure Sensor Pads/Mats |
We
offer a wide range of bed and chair pads, which sense when
weight is removed or, alternatively, floor mats which sense
when weight is put on. All pad sensors sonnect to our wired
and wireless Bed/ChairWatcher alarm monitors, from standard
carbon-based short-term (90 day) pads, to SilverLining long-life
(1 year).
Using
the unique extra large SilverLining™ pad for ultra
sensitive contract but very hard wearing surface. The result
is virtually no false alarms over a very long life. Uses
highly anti allergic soft PVC for patient comfort. Pad has
vent holes in the neck away from main area to prevent water
ingress and strain relief grip on cable attachment.
Size
available:
Bed Pad (BPL-01): 30" x 20"
Bed Pad (BPM-01): 30" x 10¡¨
Wheelchair Pad (BPL-01): 15" x 10"
Light weight floor mat (FMAT-01): 30" x 20"
Heavy-duty non-slip floor mat (FMAT-02): 48" x 24"
|
|
|
| NurseryWatcher
New Security System for Infants
|
Baby
Tagging System |
This
system gives an alert to indicate when a baby is moved out
of the ward without permission of the staff, the wrist tag
worn on the baby wrist or leg sends a signal to the Central
Monitor at the nurse station to alert the nurse.
Incidents
of infant abduction are traumatic and hugely disturbing
to parents and staff.
This is happening in hospitals worldwide causing distress
and litigation. It is damaging to facility and professional
reputations.
In large
hospitals, multiple wards may be centrally controlled form
a fully-featured central management and monitoring system.
This incorporates our database software with graphic display
of alarm events downloaded via a Local Area Network from
individual ward systems.
The
system applies the latest technology to produce a breakthrough
in small tag size, low weight and longevity. Uniquely incorporating
long-lasting rechargeable batteries, these wireless security
tags have a predicted service life in excess of 5 years.
No weight, value for money, or efficiency.
Tag size:
25mm x 25mm x 10mm
|
|
|
| SafeTime
Alert System |
| ¡E |
SafeTime
Alert system is designed to work with high quality SliverLining
SafeTime pressure sensor pads to give the very special benefit
that it alerts the caregiver when the pad expires, whether
after 3 months or 1 year.
|
| ¡E |
The
SafeTime concept means that no more overuse of worn and dilapidated
pads, prone to faults and hygiene problems, which have been
kept beyond their useful and safe life.
|
| ¡E |
The
SafeTime Alert technology has an internal clock which immediately
starts timing the life of the pad automatically, as soon as
the pad is plugged into the monitor. Plug in the pad only
when ready to use, since this starts the internal clock.
|
| ¡E |
You
can better insure the safety of patients and protect the reputation
of your facility, by minimizing the chance of caregivers inadvertently
using an old, non-functioning pad, and as a result, missing
wandering and falls by patients in their care.
Features :
|
| ¡E |
The
SafeTime Alert is a universal monitor which works with all pads
and floor mats but its unique benefit is that it works with
special SafeTime pressure pads equipped with a timer micro-chip
to provide continuous timing of the safe life of the pad (3
months or 1 year). |
| ¡E |
As
soon as the SafeTime sensor pad has expired, the monitor emits
a continuos "chirping" and the Change Pad" light
is illuminated. It's telling you it's time to change the pad!
|
| ¡E |
It's
a safety auto reset system which auto resets whether the button
is pressed or not. i.e. can't be switched off - always ready
for action! |
| ¡E |
Available
with Caregiver Key, CK-01, to avoid patient resetting the system,
or using standard reset (switchable by caregiver) |
| ¡E |
Instructions
for care and hygiene are printed on the pads. |
| |
|
| |
|
| |
|
|
|
| HushPager
with Wireless ServiceCall Buttons |
A
wireless call system to gain immediate customer help, typically
in retail or service situations, designed to meet the worldwide
need and desire to better serve customers, patients and
other service-users without fuss. For example - Calls from
wireless buttons in fitting rooms are transmitted to display
pagers carried by shop assistants.
Shop assistants receive a vibrating pager call with fitting
room ID shown on the display and are able to respond quickly
and quietly giving graceful assistance without alarm sounds
or flashing lights.
|
|
|
